Professional laser power suppliers, used to 20W to 150W Co2 glass
laser tube. The main advantage is good compatibiligy, high
conversion efficency, improving the using lifetime of laser tube.
1. Main Features:
1) Good compatibility: It can be applicable to 40W and 30W laser
tubes of a number of manufacturers.
2) Cutting Type and Sculpting Type: The cutting type has a good
power stability and strong adaptability; while the sculpting type
has a quick response speed and good engraving effect.
3) Dramatically lengthen the service life of laser.
4) Easy Control: The start and stop of laser can be easily
controlled by TTL level. And there are protection switch to test
the external water, ventilation, etc.
5) Easy control of laser power: Both 0-5V analog signal and PWM
signal can control the laser power.
6) The power supply has the function of open circuit protection:
Under the condition of good protective earthing, the power supply
can work in open-circuit condition for a short time, which could
avoid the damage of laser power supply because of the bursting of
laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used
in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene
judging which part is damaged, laser tube or laser power.
9) Application: Acrylic sculpture, cut; fabric sculpture, cut;
rubber sheet sculpture, cut, etc.
2. Specification
Input | Input Voltage | AC220V or AC110V（to be specified when placing order） |
AC frequency | 47—440HZ |
Cold Surge Current | ≤60A(AC220V Input) | ≤30A(AC110 Input) |
Current Leakage | ≤0.7MA（AC220V Input） | ≤0.4MA(AC110V Input) |
Output | Maximum Input Voltage | DC 35KV |
Maximum Output Current | DC 23MA |
Efficiency | ≥90（full load） |
Mean Time Between Failure (MTBF) | ≥1000H |
Response Speed | ≤1ms（from the switch Signal is given to the output current up to
90% of the setting current） |
Control Interface | TTL level switch control; high or low effective level can be chosen
(details refer to the control terminal specification) |
Pressure-proof | Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is
connected with machine shell. |
Protection | can work in open-circuit condition for a short time（Require a good
protective earthing and avoid arc between the positive and the
machine shell） |
Environmental | |
